urosh's Recent Posts

urosh

Tue, Jan 01, 2013, 06:54

First, thankyou thankyou thankyou thankyou thankyou

thankyou very much for Aalto.

Now, I have some ideas/suggestions.

1. External clock for sequencer.
   Two options: clock sequencer with note on from
   another MIDI track or use one note from same MIDI
   track (something like lowest MIDI note or some user
   defined note) to clock sequencer (that pll drift is great but infew occasions I want tight sequence or uneven stepping trough sequence)

2. Add Modulator->Carrier amplitude/ring modulation
   along with FM

3. Variation on Carrier oscillator: shape is mix
   between sine and saw/square. In some situations even
   small amounts of saw and square produce too much HF
   buzz. Now, there is that trick where if you take sine
   osc out and put it in FM input you get saw-alike wave
   (similar if you feedback sqaured output you get
   square-alike wave). It works very good and it's very
   stable in digital domain even with high feedback
   amount if some filtering is applyed in feedback path.
   So idea is to have another mode for carrier: shape
   parameter would increase feedback on one side (and
   feedback of squared output on other) and there would
   be no mixing of wavefolder and waveshaper blocks but
   rather waveshaper (carrier it self in this case)
   would allways feed wavefolder (i guess some
   additional stuff like dropping fback/shape amount at
   high folding amount would be needed at higher
   registers).

4. Separate outputs for Modulator and Carrier for
   modular routing (for stuff like filter FM and
   similar)

5. Add option for bandpass filter in waveguide loop
   instead of peaking filter

6. Add mod input for gate decay

7. Numerical input. In few occasions I want very very
   precise control of some parameter value, so something
   like "right click for popup where you eneter value
   from keyboard" would be nice.

That's it (for now :) ), and I wish happy 2013. to

all.