ForumsSoftware ← Aalto: The problem of an infinite sound when changing presets.

Immediately after the test plug-in encountered a problem when switching presets sound continues to play itself (where it should not be).

For example:

When you switch to a preset AcAALTO 9 (Alesandro `s Machines) on Digitaldu EDT (Ed Ten Eyck) the sound continues to play itself.
If I run the plugin and immediately load the preset Digitaldu EDT, it is silent (ie, everything is fine)

OS: Windows7, 32bit
Host: Studio One v2.0.4, EnergyXT v1.4.1 (In both hosts the problem is the same)
Aalto: v1.2.6

(I apologize in advance, poor knowledge of English)


Thanks for the report. I guess this might happen with some combinations of presets. You can probably play some MIDI notes in the new patch to make the sound stop, once all voices have been used.


Randy Ok.
It is possible to fix in future versions?

I also once got a problem when loading a previously saved project, when the sound (immediately after downloading the project) came out of nowhere (by the nature similar to the clipping of the signal at low frequencies.), with mixer indicators were silent.
Decided the issue this way: I changed a preset in the instance of Aalto who suspected phantom sound generation, and resave the project. It helped.

For what I'm talking about this case: I thought, this is probably due to the aforementioned (in first post) problem.

Yes, I will check out the cases you describe and try to fix any problems.

Aalto should make sound sometimes without notes being played. And I don't want to stop all sound when switching the patch-- there are many possibilities in letting one sound "ring out" as another when the patch changes.

The case you describe with Digitaldu EDT probably shouldn't happen though. I think you described it clearly. I will investigate.